Monet DeWall 90/90 wall panel marking saw is a computer numeric controlled wall panel saw with touch screen user interface. Cuts and marks up to 2 boards at a time using 2x4 through 2x8 or cuts and marks one board at a time using 2x10 and 2x12. Standard marker prints on the edge of one or two boards at a time and optional second marker prints on the face of one or two boards at a time. Features a servo controlled pusher and a windows 10 touch screen that can run in full auto or semi-auto mode with cut lists coming via LAN or USB drive in auto mode or touch screen setup entry in semi-auto mode. Features a 22" blade powered by a 5 hp motor. 480v, 3 phase, 40 Amp electric required. 100 PSI air at 27 CFM required.