Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2002 MiTek RoofGlider System Price: $69,000 :: FOB TX Condition: Good Description: 53 foot working length x 14' side-eject, trackless system includes (7) 6'-6" x 14' slotted, 3/4" steel-top tables w/ejectors and (30) idle conveyors. RoofGlider gantry head and the MiTek finish roller both have 24" dia., rolls.  System includes all air-manifold, electrical, jigging hardware and 18-inch bridge-plates. 480v, 3ph.
2006 MiTek Tracked Gantry Heads Price: $14,990 each :: FOB GA Condition: Good Description: Two 10 HP MiTek heads (only) are available at this location, each with operator platform, safety bars, button controls, 24 inch diameter roller, electric brake, variable speed control to 160 feet per minute and 80 RIV drive chains.  Designed to fit TeeLok center-to-center rail spacing of 15'-1".  460 volt, 3 phase electrical.
2005 MiTek RoofGlider Gantry (FL) Price: $61,900 :: FOB FL  NEW ITEM! Condition: Good Description: 102 foot working length, MiTek side-eject system featuring 14 feet working height, tracked system with (14) 6'4" x 14 foot, slotted 3/4" steel-top tables with ejectors and (6) slots per table. Includes (2) 14'x24" dia. gantry heads, (13) stand-alone receivers, air-manifold, gantry head electrical chord system, bridge-plates and jigging hardware.  460v, 3phase electrical.
2004 MiTek Tracked Gantry System (CO) Price: $69,555 $54,900 :: FOB CO Condition: Good Description: 110 foot MiTek Side-eject system featuring 14 feet working height, tracked system with [14] 6'4" x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] slots per table. System includes [2] 14'x24" dia. gantry heads, MiTek Final Roller, air-manifold, electrical bus bar system, jigging hardware, bridge-plates and ejector covers, 29 inside conveyors (14 pwr), 18 outside conveyor (8 pwr), 16 manual stacker arms. 460v, 3phase electrical.
2004 MiTek Tracked Gantry (UT) Price: $142,000 $48,900 :: FOB UT Condition: Good Description: 14' X 156' side-eject gantry with floor mounted rail. Includes [20] 6 foot x 14 foot slotted, 3/4" steel-top tables with ejectors and [2] gantry heads each with a 24 inch diameter roll.  Gantry includes all air-manifold, bus bar electrical, jigging hardware, bridge-plates, etc. and is wired for 460 volt, 3 phase electrical service.  Taken out of service in May of 2008.  [Finish press and rollers shown in some pictures are not included.]
2004 MiTek Tracked Gantry (GA) Price: $154,000 $59,000 :: FOB GA  PENDING Condition: Good Description: 14' x 142' side-eject gantry with floor mounted rail. Includes (18) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors.  Includes two (2) model 68000 gantry heads each with a 24" dia. roll, and (1) model 68300 24" final roller, (15) powered interior rollers, (16) unpowered interior rollers, (13) powered exterior rollers, (22) unpowered exterior rollers,  (10) 4' horizontal unpowered rollers. System includes all air-manifold, electrical bus bar system, jigging hardware, bridge-plates, etc.  480V, 3 ph power.
1998 MiTek Tracked Gantry (TX) Price: $68,000 $53,900 :: FOB TX Condition: Good Description: 98 foot working length 'x 14' side-eject system includes [12] steel/wood tables with Uni-Strut, [30] idle conveyors and 24" dia. rollers in both the gantry and finish roller.  Includes all air-manifold, electrical, jigging hardware , 460v, 3ph power.
2005 Robbins No-Rail Gantry System Price: $197,000 $135,000 :: FOB TX Condition: Good Description: 14'x180' trackless gantry with aisles.  Includes (2) gantry heads,  (26) plastic-top, steel tables with ejectors, full-length powered transfer roller, (21) powered and (9) idle conveyors, (1) 15'-6" Robbins finish roller. Each gantry head includes an AC invertor soft start control with 15 HP drive.  System includes all air-manifold, bus-bar electrical, jigging hardware and bridge-plates.  440v, 3phase.  Seller is willing to sub-divide this system.
2005 Robbins No-Rail Gantry Price: $135,000 $98,000 :: FOB TX Condition: Good Description: 14'x180' trackless gantry with aisles.  Includes (2) gantry heads,  (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive.  System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates.  440v, 3phase.  Seller is willing to sub-divide this system.
2001 Robbins No-Rail Gantry System Price: $133,887 :: FOB IN Condition: Good Description: 14'x186' trackless gantry with aisles. Includes (3) 14' x 24" gantry heads, (27) Slotted steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive, photo-eye with safety bar. Robbins Super-Torque 14'x24" final roller, 34 inside conveyor [17 pwr], 20 outside conveyor [7 pwr]System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 460v, 3phase. This system can be divided into custom length to meet buyer's specifications.