Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2004 Robbins Jack Table / Bridge Press Price: $14,900 $11,900 :: FOB TX Condition: Good Description: Nominal 6' x 30' table top, with plastic building surface and wood underlayment for building jacks, valley sets, etc.  12" x 6 foot wide beam press platen.  Joy stick travel controls and push button press controls with emergency stop button.  3000 psi, 5 HP motor, 440 volt, 3 phase electrical.
1997 Pacific Automation TR-14 Gantry Line Price: $39,545 $29,854 :: FOB MN Condition: Good Description: Side-eject system 14'X80' working length includes TR-14 gantry head with 24" dia. Roller, and inverter drive. Featuring a total of 11 tables [4] 14'x6' slotted steel J-Slot [1] 4'2"x14, [1] 1'9"x14 and [5] 6'7"x14' J-Slot tables with plastic intermediates (purchased in 1999). System includes 76' of [9] power/[10] idle out-feed conveyor ejectors, all track and base plates, [7] ejectors/receivers, and a 1990 CMF 14'x36" dia final roller press. 460V 3Ph.
1996 Pacific Automation TR-14 Gantry Line Price: $67,875 $39,000 :: FOB KY Condition: Good Description: 14' X 76' System consists of 24" X 14' AutoRoll-14TR Gantry s/n PA250. 24" X 14' AutoRoll Final Roller Press s/n PA264, (10) steel/plastic Uni-strut tables with lift-outs, plastic table surface is N.E.W. T&G Perma-Poly board, (10) conveyor sections w/receivers, approx. 80' outside conveyor, rail & base plates, electrical 440V 3-ph. (no air manifold). System was used in light production and has been in storage since 2004.  Disassembled and ready to ship!
2002 Tee-Lok Roof Truss Line (CO) Price: $35,854 $29,500 :: FOB CO Condition: Good Description: Side-eject Tee-Lok, 90' gantry system featuring (12 ) MiTek 2004 Tee-Slot tables with recessed tape measures, with (1) Tee-Lok 14'x18" dia. roller gantries, 85 lb.crane-rail with base plate. Also includes [20] idle, [14] power 14' inside/outside conveyor rollers, idle roller transfer and one Tee Lok finish press. With all-jigging hardware, isle pads, air-minifold and electrical.  460v, 3ph.
2000 Tee-Lok Roof Truss Equipment Price: $4,100 :: FOB NJ Condition: Fair Description: Side-eject Tee-Lok equipment featuring (8) Tee-Slot tables with recessed tape measures, 85 lb.crane-rail with base plate (tables & track to create a 59' section - Gantry heads below are sold as individual items).
1990's + Tee-Lok Track Gantry Heads Price: $1,900 ea. :: FOB NJ Condition: Good to Fair Description: (5) Tee-Lok gantry heads, 14' length, 18" diameter roller, pendant controls, soft-start package, 480 volt, 3 phase. Can be converted to 240 volt, priced each
1999 Tee-Lok Side-Eject Gantry Price: $59,950 $14,900 :: FOB OH Condition: Good Description: Side-eject system with (18) Tee-Slot tables with recessed tape measures, THREE (3) Tee-Lok 14'x18" dia. roller gantries, system includes air-manifold and available jigging hardware.  One-owner system that has been well maintained (This system CAN be divided into a shorter length.  The three gantry heads can be sold as individual items.  Contact us for details), 440v, 3 ph.
1998 Tee Lok Rail Gantry Price: $25,300 :: FOB CA Condition: Good Description: 64 foot working length Tee Lok gantry with [9] tables, 6 ft x 14 ft each. Tee-Lok 14'x18" dia. roller gantry, 440v, 3 ph., 7.5 h.p. motor, steel slotted gantry tables with lift-out ejectors.  Includes [9] receivers, [6] powered conveyors and [19] unpowered conveyors, air manifold, jigging, aisle plates, ejector cover plates and electrical cables. Tee Lok finish press sold separately.  See separate ad listed on this website.
2006 CMF Roof Gantry Price: $46,000 :: FOB ID  NEW ITEM! Condition: Good Description: 100' working length x 14' side-eject system, refurbished by CMF in 2006.  Includes sixteen (16) 5'x14' steel bottom chord tables w/ejectors and composite building surface above the steel, one (1) 24" dia. CMF roller Gantry with a 10 HP drive, one (1) 24" dia. CMF final roller, twenty seven (27) receivers, nineteen (19) powered roller conveyors and thirteen (13) idler conveyors.  Also includes crane track, aisle slider pads, air-manifold, electrical and jigging hardware. 460v, 3ph power.
2006 Lacey Harmer Sense-A-Plate Detector Price: $19,490 :: FOB MN Condition: Good+ Description: Truss plate detector includes variable roll height adjustment, two rows of detectors, control processor, missing plate alarm and middle support leg.  Approximate size is 2' x 17'-9" x 4'-3" high.  110 volt, 1 phase electrical.  PDF brochure available.