Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

Teelok / MiTek Jack Station Price: $18,000 $11,500 :: FOB GA Condition: Good Description: Jack station features TeeLok 14' single drive final roller press, (2) MiTek 6'4" steel-slotted tables, (3) 14' material conveyors, (4) truss racks for manual stacking, 480V 3ph.
2004 Alpine Finish Roller Price: $13,900 :: FOB CA Condition: Good Description: Model number 725d, 15 HP motor, 15'-6" throat with 24 inch diameter rolls.  Includes safety bars, limit switches and emergency stop.
2002 Pacific Automation Finish Roller Press Price: $17,900 $14,750 :: FOB CA Condition: Good Description: This Auto Roll model is a 14 foot throat final roller with 24 inch diameter rolls, 1 inch wall thickness, ¾” x 3” steel frame, 3 inch continuous shaft supported by four baffles and uses push-button controls.  Includes infeed and outfeed idler roll mounted to the frame, dual-safety bars, chain and sprocket guards.  Contains [2] 5 HP motors.  Wired for 460volt, 3 phase electrical service.
1998 Tee Lok Finish Roller Press Price: $8,800 :: FOB CA Condition: Good Description: 20 inch diameter x 14 foot throat finish press.  Forward/reverse functions with two safety bars, chain and sprocket guards.  Has safety shut down for both in and out direction.  Includes infeed and outfeed steel tables.  480 volt, 3 phase.
2000 Robbins Finish Roller Press Price: $11,900 :: FOB OR Condition: Good Description: Model ST 2414, 14' final roller with 24" diameter rolls, 1" wall thickness, 4" continuous shaft supported by 8 baffles.  Twin 7 h.p. drives, 460v, 3 phase, with dual-safety bars, in/out idler rollers, chain and sprocket guards.
Robbins Finish Roller Press Price: $8,900 :: FOB ID Condition: Good Description: Model ST 2414, 14' final roller with 24" diameter rolls, 1" wall thickness, 4” continuous shaft supported by 8 baffles.  Twin 7 h.p. drives, 460v, 3 phase, with dual-safety bars, in/out idler rollers, chain and sprocket guards.
Klaisler Finish Roller Press Price: $8,700 :: FOB MN  NEW ITEM! Condition: Good Description: Unit refurbished in 2002 and a new, OEM roll by Klaisler, added in 2003.  Features two 5 HP motors with a frequency drive, two 18 inch diameter rolls, 14 foot wide throat, push button controls, emergency stop, safety bars and limit switches.  440 volt, 3 phase electrical.
2006 Klaisler 15' Final Roller Price: $13,900 :: FOB NV  PENDING Condition: Good+ Description: Klaisler Model # TR4BH215-24SS, s/n 2496, 15' final roller with 24" diameter rolls, 1" wall thickness, 1" X 4" Steel frame, Grade 8 fasteners, 4" diameter shafts supported by 4 baffles. Twin 7.5 h.p. Sumitomo drive systems (15 h.p. total), soft-start package, 230v-460v, 3 phase, with dual-safety bars, chain and sprocket guards. (unit has seen very light use, unused for 2 years - $29,000 new)
1996 Tee Lok Final Roller Price: $13,944 $9,957 :: FOB OH Condition: Good Description: Tee-Lok 14'x24" dia. H.D. final roller, 220/440v, 3 ph., forward/reverse functions with dual-safety bars, chain and sprocket guards, one-owner unit that has been well maintained and serviced.
1994 Klaisler Finish Roller Price: $12,900 $7,900 :: FOB ID Condition: Good Description: 14' Final Roller features two five HP EuroDrive drive motors, 24 inch diameter rollers. Reshafted and repainted in '05. Wired for 480 volts and is operational.