Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Roof Truss

1993 Klaisler Final Roller Price: $13,854 $7,490 :: FOB CT Condition: Good Description: FRP Model #: TR214-18, 14' finish roller press with 18" diameter rolls, H.D. steel frame, continuous shaft supported by 4 baffles. Twin 5 h.p. drive systems (10 h.p. total), 460/230v, 3 phase, with single-safety bar, chain and sprocket guards, recent paint and bearing maintenance.

1980 JD Adams Finish Roller Press Price: $4,800 :: FOB CA Condition: Good Description: 20 inch diameter x 14 foot throat. Includes shut down switches, safety bars, steel infeed and outfeed tables and guards. 480 volt, 3 phase.

Klaisler Finish Press Price: $2,900 :: FOB FL Condition: Good Description: 14'-0" final roller with 18" diameter rolls, H.D. steel frame, continuous shaft supported by 4 baffles. Twin 5 h.p. drive systems (10 h.p. total), 240v, 3 phase, with single-safety bar, outfeed idler roll, chain and sprocket guards.

GCA Finish Press Price: $9,444 $8,340 :: FOB TX Condition: Good+ Description: Remanufactured in 2008. 12 inch diameter roll x 10 foot wide throat. 2 HP motor, dual chain, start / stop / reverse controls, panic bars and safety guards. Can be adjusted to press floor trusses. Can be wired for either 220 or 440 volt, 3 phase electrical.

Eagle Clamp System Price: $20,790 :: FOB GA Condition: Good Description: 30 foot truss press frame with six pods, PowerGlide electric delivery and Eagle TP100 clamp. Includes PE55 2s pump and 25 ton cylinder. Motor is 1.125 HP. Maximum height truss capacity of 10 foot. Boom is 12 foot long overall. Clamp platen is 5.25 x 6.25 inches. Pods have unistrut tops that are easy to replace or reconfigure. 220 volt, single phase electrical.

TeeLok Multi-Head Price: $7,245 :: FOB OH Condition: good Description: Great systems for commons and long runs! Three systems available each including (5) bottom chord pedestals w/8"cylinder and (3) top chord pedestals w/6" retracting cylinders, 40HP 230/460V, pit required, out of service.

1991 Clark Industries Multi-Head Price: $14,481 $5,880 :: FOB OH Condition: Good Description: Model "24" system builds from 16'-30' form 3/12 to 5/12 pitch (can be modified for up to 7/12), includes eight pressing heads, HD hydraulic unit with reserve tank and electrical panel, on pallets and ready for shipping.

1991 Clark Mini-Barn Press Price: $15,265 $5,147 :: FOB OH Condition: Good Description: System produces 8'-12' mini barn trusses, includes (7) pressing heads and outside stacker, currently in production, pit required.

1991 Clark Industries Mulit-Head Price: $9.924 :: FOB PA Condition: Good Description: Model "24" system builds from 16'-30' form 3/12 to 5/12 pitch (can be modified for up to 7/12), includes eight pressing heads, HD hydraulic unit with reserve tank, pop-up ejector, truss stacker and electrical panel,

2004 MiTek RoofGlider Extension (NJ) Price: $32,500 :: FOB NJ SOLD Condition: Good Description: Roof Glider equipment featuring a Roof Glider 14'x24" dia. trackless gantry head and [3] side-eject, 6’-6” x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] slots per table - 460v, 3 Ph. electrical.

<< Previous Page

1 2 3 4 56

Items 51-58 of 58