Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2005 TCT 1150 Linear Saw (TN) Price: $44,990 $32,500 :: FOB TN Condition: Good Description: Series 1150 chord/web saw features servo controlled functions that cut 2x4 and 2x6 chords, webs, wedges, scissor bottoms chord cuts, 4-angle pieces as short at 13 inches and 3 angle pieces as short as 3 inches at angles as low as 11 degrees on 2x4 material. Saw includes one 24" blade, TCT scrap conveyor, and Mathews Inkjet marking system. Unit is wired for 240 volt, 3 phase electrical service.
2005 TCT 1100 Linear Saw (AZ) Price: $34,900 :: FOB AZ  NEW ITEM! Condition: Good Description: 1100 Series TCT automated linear saw that cuts 2x4 and 2x6 boards.  Includes LCD computer display, a 5 HP motor with a 24" blade, a standard TCT scrap conveyor and a Mathews Inkjet marking system,  230V 3 ph., 80 psi air.
2005 TCT 1100 Linear Saw (Ariz.) Price: $29,500 :: FOB AZ Condition: Good Description: 1100 Series TCT automated linear saw that cuts 2x4 and 2x6 boards.  Includes LCD computer display, a 5 HP motor with a 24" blade, a standard TCT scrap conveyor and a Mathews Inkjet marking system,  230V 3 ph., 80 psi air.
2004 TCT 1100 Linear Saw WITH EZ Trimmer Price: $59,000 :: FOB WI Condition: Good Description: 1100 Series TCT saw that cuts 2x4 and 2x6 boards.  Includes LCD computer display, a 5 HP motor with a 24" blade, a standard TCT scrap conveyor and a Mathews Inkjet marking system, INCLUDES - EZ Trimmer cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber. Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw. Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics. Air requirements are 80 psi at 9 cfm.
2004 TCT 1100 Linear Saw Price: $106,000 $79,900 :: FOB FL Condition: Good Description: 1100 Series TCT saw that cuts 2x4 and 2x6 boards.  Includes LCD computer display, a 5 HP motor with a 24" blade, a standard TCT scrap conveyor and a Mathews Inkjet marking system,  230V 3 ph.  Requires 80 psi air pressure, extra blade.
2003 TCT 1150 Linear Saw Price: $84,450 :: FOB FL Condition: Good Description: Series 1050 purchased in October of 2003 and upgraded by TCT in 2005 to run the 1150 software. The upgrade included TCT’s Dual Feedback upgrade package. The Dual-Feedback upgrade brought the saw up to 1150 cutting capability. The only thing different about this saw and a factory built 1150 is that the angulation is controlled by a servo-gearbox combo instead of the direct drive servo that comes on a standard 1150. The saw now cuts 2x4 and 2x6 chords, webs, wedges, scissor bottoms chord cuts, 4-angle pieces as short at 13 inches and 3 angle pieces as short as 3 inches. This saw will also cut down to 11 degrees on 2x4 verses and the feed rate was increase to 5 feet per second. Included is a 5 HP motor with a 24" blade, a standard TCT scrap conveyor and a Mathews Inkjet marking system. Unit is wired for 240 volt, 3 phase electrical service.
2004 TCT EZ Trimmer (OH) Price: $6,900 :: FOB OH Condition: Good Description: EZ Trimmer cuts model CT041-2000 double bevels on pitches from 0/12 to 12/12 including 2 x 3, 2 x 4 and 2 x 6 lumber.  Totally enclosed, this unit has an average cycle time of 15 pieces per minute and can be used as a stand alone unit or attached to and powered from another TCT saw.  Includes a 5 HP, 3 phase, variable frequency drive and Bosch-Rexroth/SMC pneumatics.  Air requirements are 80 psi at 9 cfm.  Electrical requirements are 240 volt, 3 phase and 30 Amps.
2001 Alpine Automill RS & Carousel Price: $79,140 $52,200 :: FOB FL Condition: Fair+ Description: 2001 Alpine Automill RS- This Model 344 saw is currently in use. Five-head automated component saw works in both automated (downloading files) and semi-automated control via monitor and mouse. Customer has touch screen but it is not functioning.  Single sided setups. Cuts from 2 foot to 20 foot long boards. Includes 3x18", 1x22" and 1x32" blades. Blades have air brakes. The saw is wired for 220 volt, 3 phase electrical service but a 440 volt transformer is included. Price includes Alpine carousel, scrap conveyor and incline.
1997 Timbermill MH6PRO SSD-20 Price: $33,530 $19,954 :: FOB WY Condition: Good+ Description: Mod.# MH6Pro SSD-20, Single-side operation for all six blades set-up with easy-to-read digital angulation that cuts lumber from 2x4 through 2x12, 4x2 lengths from 12" to 20' including four angle floor truss webs from 18", all powered movements,"Pro" model features faster angulation movements, faster carriage speeds with soft-start technology, dust hoods, 230V/3Ph, includes chain-drag scrap conveyor with long incline, power supply panel ($1,200 value), spare blades, and many spare parts including a 10 h.p. saw motor. This is a versatile and reliable saw that has been carefully maintained including a professional ($15k) rebuild in recent years.
1997 Timbermill 4-16 GD Price: $17,959 $15,900 :: FOB NC Condition: Good Description: Timbermill Mod.# MH4GD-16, s/n AB06XX, four blades cuts lumber from 2x4 through 2x6, and 4x2 material in lengths from 12" to 16' including four angle floor truss webs from 18", all powered movements with digital read outs, photo-eye safety stop, enhanced guarding, and drag-chain scrap conveyor, with long incline. 230V, 3Ph.