Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

Idaco Web-O-Matic Price: $5,454 $2,900 :: FOB WI Condition: Good to Fair Description: Idaco Web-a-matic - 4 blade web saw with manual angulation, and carriage, shortest cut 8" @ 90/90 to 9'. Can cut as short as 1'-3 1/2" four angle floor webs. Saw has been upgraded during its service life, includes waste conveyor with incline. 230v, 3ph power.
Idaco Web Saw Price: $3,900 $2,990 :: FOB TX Condition: Good Description: Four blade Idaco web saw model FC51, with mechanical length and angle movement, analog scales, waste conveyor and incline.  Blades are (2) 19", 16" and 15". Cuts up to 2 x 10" depth lumber from 18" to 10 feet lengths.  Cuts 1-7-14 minimum 45 degree angle, four angle floor webs.  440 volt, 3 phase.
Clary 324 Web Saw Price: $4,900 $2,990 :: FOB TX Condition: Good Description: Year unknown.  Clary Model 324 Versa, with power length carriage,  four blades centerline scarf blade, drag chain waste conveyor with incline.  Minimum angle approximately 10 degrees, maximum angle 135 degrees. Minimum length cut is 18 inches and longest length cut is 20 feet.  Cuts 90/90 blocks to 16" and four angle floor webs from 20".  Cuts to 2 x 12 inch depth lumber.  Scrap and incline included.  Blades are 27", 18", 16" and 15".  440v, 3 phase.
Clary Craft Master Price: $5,900 :: FOB TX Condition: Good Description: Model CM, four-blade web saw, cuts from 11" @90/90 with single sided setup.  Cuts lumber from 4 to 12 inch depths. Saw includes analog readouts, scrap conveyor with incline, [1] 24 inch blade and [2] 16 inch blades.  Missing one blade.  Length is powered and angles are set manually.  Taken out of operation in the fall of 2007.  240 volt, 3 phase electrical.
1999 Eagle Fast Cut II Saw Price: $9,900 :: FOB CO Condition: Good Description: Model number FCT II.  Four blade saw cuts 2 x 4 or 2 x 6 lumber in lengths from 1 foot to 20 feet. Includes the scrap conveyor and incline. Waste, incline and cutting action are all powered.  Angulation is manual.  Brakes are mechanical. 240 volt electrical.
2004 Vista UpCut Saw (OH) Price: $4,500 :: FOB OH Condition: Good+ Description: Model S-20 semi-automatic air actuated under table cutoff saw.  Makes 90 degree cuts only.  Includes clam shell guard, 20" carbide tipped saw blade, 10 HP, tefc, arbor drive motor  and a two-hand cycle control .  Includes 1-1/2HP SF-50 Delta dust collection, Wired for 460 volt, 3 phase electrical service.
2004 Vista UpCut Saw (WI-OH) Price: $6,900 $4,500 :: FOB OH Condition: Good+ Description: Model S-20 semi-automatic air actuated under table cutoff saw.  Makes 90 degree cuts only.  Includes clam shell guard, 20" carbide tipped saw blade, 10 HP, tefc, arbor drive motor  and a two-hand cycle control .  Includes 10ft infeed 10ft outfeed HD roller conveyor, 1-1/2HP Delta dust collection, Wired for 460 volt, 3 phase electrical service.
Vista UpCut Saw (PA) Price: $4,490 $3,900 :: FOB PA Condition: Good Description: Model S-20 semi-automatic air actuated under table cutoff saw.  Makes 90 degree cuts only.  Includes clam shell guard, 20" carbide tipped saw blade, 10 HP, tefc, arbor drive motor  and a two-hand cycle control .  Includes 10ft infeed 10ft outfeed HD roller conveyor, 1-1/2HP Delta dust collection, Wired for 460 volt, 3 phase electrical service.
2002 Sego Under Table Upcut Saw Price: $4,800 $3,900 :: FOB PA Condition: Good Description: Sego 18 inch under table saw with a 16 foot Tiger Stop measuring system for 90 degree wall panel cuts..  Includes dual palm controls and front trough for marking plate material. 1 1/2 HP Delta vacuum and marking trough. 480 volt, 3 phase electrical for saw, stop and vacuum are 120 volt, 1 phase.
2010 Apollo Radial-Arm Saw Price: $14,300 :: FOB CA Condition: NEW Description: Centerpoint fenceline saw, Direct-Drive 5.5 h.p. 220/440v, 3ph power, cuts 4x2, 2x3 through 2x12 material in EITHER 90° or 180° quadrants, from 9.5° +/- ,and up to 37” cuts with a 17.75” carbide-tip blade. Features stroke limiter, powder-coat finish, and miter-cut pins. Plexiglas shield, clam-shell blade guard, with laser guide now standard for maximum operator safety and minimal regulatory hassle! Flat-rate freight: $500. to anywhere in continental U.S. and Canada.