Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2004 Alpine Metra Cut C/L (OH) Price: $8,500 $6,500 :: FOB OH Condition: Good Description: Model 645 centerline radial arm includes center-point cutting, turntable cutting system, 16" blade, 10ft. infeed, 10ft. out-feed conveyor, Includes 10ft Speed Measure 480V 3-ph.
2002 Alpine Metra Cut C/L (PA) Price: $6,499 $4,900 :: FOB PA Condition: Good Description: Model 645D centerline radial arm includes center-point cutting, turntable cutting system, 16" blade, 20ft. infeed, 10ft. out-feed conveyor, Includes 20ft Speed Measure, spare blade, 480V 3-ph.
2002 Alpine Metra Cut C/L (Ohio) Price: $6,500 $4,900 :: FOB OH Condition: Good Description: Model 645D centerline radial arm includes center-point cutting, turntable cutting system, 16" blade, 20ft. infeed, 10ft. out-feed conveyor, Includes 20ft Speed Measure, spare blade, 480V 3-ph.
2000 SpeedCut MetraCut Centerline Saw Price: $6,400 :: FOB PA Condition: Good Description: Centerline saw with 22 foot Speed Measure, model SSA-17, turntable cutting system.  Minimum angle is 5 degrees and the maximum angle is 135 degrees.  Maximum scarf cut is 22 inches.  Includes (1) 15" blade, 22ft. infeed conveyor, 12ft. outfeed conveyor.  230 volt, 3 phase electrical.
RECONDITIONED Speed Cut Metra Cut C/L - HAIN MEA Price: $9,500 :: FOB SC  NEW ITEM! Condition: Good Description: Reconditioned model SSA-17 centerline radial arm includes center-point cutting, turntable cutting system, with 2008 15' foot HAIN Measuring Device (measures to 16' material) with low profile center-line attachemnt on new Hytrol infeed conveyor, 10 foot outfeed conveyors. 208V 3-ph. (Hain MEA alone $8,900 new)
1995 Speed Cut Metra Cut C/L (CA) Price: $3,800 :: FOB CA Condition: Good Description: Model SSA-17 centerline radial arm includes center-point cutting, turntable cutting system, 20 foot infeed, 20 foot outfeed conveyors and 15" blade. 480V 3-ph.
1994 Speed Cut Metra Cut C/L (FL) Price: $5,990 $3,500 :: FOB FL  PENDING Condition: Good+ Description: Centerline saw with Speed Measure model SSA-17.  Radial arm saw includes center-point cutting, turntable cutting system, INCLUDES 18ft Speed Measure System with 18ft. infeed conveyor, 10ft. outfeed conveyor and (2) 16 inch diameter blades.  220 volt, 3 phase.
1994 Speed Cut Metra Cut C/L (ID) Price: $3,500 :: FOB ID Condition: Good Description: SpeedCut Metra-Cut centerline radial arm saw, model SSA-17, includes center-point cutting, turntable cutting system, 14" blade, 20ft. infeed, 10ft. out-feed conveyor and 20 foot Speed Measure. 220V 3-ph.
1993 Speed Cut Metracut C/L Price: $5,500 $2,500 :: FOB UT Condition: Good Description: Model SSA-17 centerline radial arm includes center-point cutting, turntable cutting system, 16" blade, 15ft. infeed, 10ft. out-feed conveyor, Includes 16ft Speed Measure (needs sprocket) 460V 3-ph. Taken out of service 06/08.
1983 Speed Cut Metra Cut Centerline Saw Price: $2,900 :: FOB WA Condition: Good Description: 1983 Speed Cut Metracut C/L - SpeedCut / Metra-Cut model SSA-11 centerline radial arm includes center-point cutting, turntable cutting system, 16" blade, 10ft. infeed, 10ft. out-feed conveyor.  220V 3-ph.