Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

1980 Speed Cut Metra Cut Fenceline Saw Price: $2,000 :: FOB WA Condition: Good Description: 1980 Speed Cut Metracut  fenceline saw, turntable cutting system, 16" blade, maximum cutting depth of 6" , maximum length of 36", 164 deg. cutting range, 5HP 3ph motor, 220/440V, Ten feet of infeed conveyor and ten of out.
1979 SpeedCut Mobile Fenceline Saw (TX) Price: $1,900 $900 :: FOB TX Condition: Good Description: Mobile cutting station for jobsite production.  Fenceline saw, 24" cross cut capacity for up to 6" thick material, 160 deg. angle range from 10 deg. to 170 deg., quick-stops for 45, 90, 135 deg. angles, Model #MSSA-2, serial #J0139.  Includes 10 ft infeed and 5 ft outfeed conveyors, 16" blade, belt-driven. 5HP 220V 1-PH motor.
Speed Cut Fenceline Saw Price: $2,900 :: FOB MT Condition: Good Description: Year unknown.  Fenceline saw, turntable cutting system, 16" blade, maximum cutting depth of 6" , maximum length of 36", 164 deg. cutting range.  5HP motor.  Includes a spare blade, 14 foot speed measure on a 12 foot long frame, ten feet of infeed conveyor and a 3 foot outfeed shelf.  230v, 3 phase.
1995 Speed Cut SRC Rafter Cutter Price: $2,950 :: FOB CA Condition: Good Description: One person rafter cutter can make single or double compound cuts and simple cuts on either end of the rafter.  Features twin H.D. 7.5" Milwaukee worm-drive circular saws, 10' infeed conveyor and 22' outfeed conveyor.  Turntable system allows for precise angle cuts and easy set-up, 120v, 30 Amp, 90 psi air.
Rafter Cutting Bevel Saw Price: $1,900 :: FOB MT Condition: Good Description: One person rafter cutter can make single or double compound cuts and simple cuts on either end of the rafter.  Features twin H.D. Makita worm-drive circular saws, turntable system allows for precise angle cuts and easy set-up.  120v, single phase.
2006 Holtec Transcut HF-E Bunk Saw Price: $4,988 :: FOB NV  SOLD Condition: Good+ Description: Portable yard saw for pre-cutting bunks of lumber to length for automated component saws or studs. 15 h.p., 460vac, 3ph power, Stihl .404 pitch saw chain, 30'+ electrical lead, auto-oiler, pneumatic tires, cuts 63" x 9mm kerf for processing up to 40"x44" lumber bunks.
2004 Holtec Transcut II Bunk Saw with Roller Bed Price: $6,750 :: FOB CA Condition: Good Description: Yard saw for pre-cutting bunks of lumber to length for automated component saws or studs. Includes four foot wide roller bed twenty feet long.  Motor is 10 h.p., 460 volt, 3 phase power, .404 pitch saw chain, 62 inch long blade path cuts up to 40 inch x 60 inch lumber bunks.  Seller does have wheels and bolts to return the saw to it's original portable condition.
Steve Wynn Takes On Washington, DC Price: $Priceless :: FOB NV Condition: Right On Description: Steve Wynn, a casino resort/real-estate developer who has been credited with spearheading the dramatic resurgence and expansion of the Las Vegas Strip, talks about the Fall of America.
2007 Alpine X4 Linear Saw Price: $119,000 $49,900 :: FOB ID  SOLD Condition: Good Description: Linear fed saw Model X4, with touch screen controls, cuts truss parts up to 12" deep lumber width, can cut 60" scarf cuts, optimizes material, with production rates up to 7,000 pieces per eight hour shift. The X4 cuts up to four boards at a time with printing capabilities on each board. The clamping system is hydraulic. This saw includes an optional 20 foot Alpine in-feed conveyor and a 15 foot Alpine out-feed conveyor, belt scrap conveyor and optional Ink jet printer. Each axis movement is powered by servo motors and gear boxes.  Includes a 15 hp motor with a 22" carbide tipped blade. Electrical requirements include 230 volt, 3 phase, 125 Amp service to the blade unit and 120 volt, 15 Amp service to the scrap system. Air required is 10 SCFM at 90 psi.  Out of operation since January of 2008.
2006 Vista Up-Cut Saw with TigerStop & Vacuum Price: $10,900 :: FOB GA  SOLD Condition: Good Description: Model S-20 semi-automatic air actuated under table cutoff saw.  Makes 90 degree cuts only.  Includes clam shell guard, 20" carbide tipped saw blade, 10 HP, tefc, arbor drive motor  and a two-hand cycle control .  Wired for 480 volt, 3 phase electrical service.  Tiger Stop s/n: 0612521 Mod. LVL-1, length measuring device includes PC controls with keypad and 16 feet of measuring stop.  System includes 18 feet of infeed table and 10 feet of outfeed table with legs.