Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

1998 Triad Diamond Quad Framer Price: $10,500 $4,900 :: FOB UT Condition: Good Description: Framing Table is 20 feet long overall and builds walls from 6’-8” minimum to 10’-0” maximum wall heights.  Powered height adjustment is motor controlled, includes stud locators for both 16 and 24 inch on-center stud spacing, air activated pop-up ejectors with skate wheel rollers. No tool dollies included. (table has tubular steel center spine with a trailer connection for possible conversion to a portable system).
1998 Triad Gen II Framing Table Price: $11,500 $4,900 :: FOB UT Condition: Good Description: Triad framing table features a 16 foot long working length and builds from 6’-8” minimum wall height to 12’-0” maximum wall height.  Power wall height adjustment with air-actuated pop-ups, stud locators for both 16 and 24 inch on-center stud spacing and on-table conveyors. (system converted from a squaring table using a retrofit kit from Triad).
Triad Rough Opening Lay-Up Table Price: $1,644 :: FOB PA Condition: Good Description: Triad Lay-Up table for rough opening/sub-component assembly features skate-wheel pop-up, steel construction in a walk through design.
Carlson Wall Framers Price: $15,208 each $13,200 each :: FOB TX Condition: Good+ Description: Remanufactured in 2008.  Wall panel sizes 7 to 12 feet height, 16 foot long.  Color coded stud locators at 16 and 24 inches on-center.  Manual height adjustment, measuring tapes on each plate side, air cylinder controlled ejection system.  Two- 2 gun carriages provided with each framer.  Two framers available at this price and location.
2008 Panel Lift with Pneumatic Hoist Price: $1,600 each :: FOB PA Condition: Good Description: 2008 Triad - Panels Plus Panel Lifts - HD construction lifts panels from 7' to 12' in wall height, features Harrington pneumatic ½ ton hoist and pendant control.  Air powered movement both horizontally and vertically.  Three [3] to choose from.  Price per each.
Triad Panel Lifts & Hoists Price: $1,000 each :: FOB OH Condition: Good Description: Three available at this location.  Price per each set of one lift with one hoist.  The hoist is all electric.  Horizontal movement along beam is done manually.  Vertical movements are powered.  110 volt, single phase.
2008 Handle Bar Router Price: $988 each :: FOB PA Condition: Good Description: 2008 Triad and Panels Plus Handle Bar Router with HD Porter-Cable routing head.  One of each brand [2] to choose from.  (Priced each @ $988 - $2,800 new)
2005 Hain Sub-Component Nailer Price: $11,954 :: FOB MI Condition: Good Description: 2005 Hain Sub-Component Nailer Model SCN - Sub-component assembler includes optional set up for coil fed nail guns. This model SCN handles 2x4 and 2x6 material and requires 100 PSI of air along with 120 volt electrical service. Includes automated off-feed system, ten foot long infeed and outfeed conveyors. System INCLUDES over 20 boxes of 10Dx.131 coil nails (4,600 nails per coil). (Open listing to view VIDEO)
GCA Model 741 Subcomponent Nailer Price: $9,514 $8,200 :: FOB TX Condition: Good+ Description: Unit includes 10 foot infeed platform and 10 foot outfeed conveyors.  Includes lumber stop and hold downs, foot pedal controls, single gun mounts on each side.  Builds both 2 x 4 and 2 x 6 subcomponents.
Safety Speed Cut H-5 Panel Saws (2) Price: $1,700 Each :: FOB PA Condition: Good Description: Model H-5 saw features a 64 inch maximum cross cut, unlimited rip cut and thin-material pressure guard.  The saw has an 8 inch blade that can cut thicknesses up to 1 ¾ inches.  The 10 foot long frame is on wheels.  The saw weighs 298 lbs and the motor is 120 volt, single phase and 15 Amps.  Two available at this location.