Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2002 Koskovich Omni Mini-Miser Price: $29,590 :: FOB IN Condition: Good to Fair Description: Automated cut-off and marking saw for wall frame processing, 90° (square) cuts only. Cuts and marks all wall frame parts up to 15,000 ln. ft. per 8 hour shift (feed rate to 50 ft per second.). Features on the fly D-Print option (two face + one edge Matthews Ink-Jet) printing layout and part I.D. from all major wall design software. Hand feed material from 6' to 16', 2x3 through 2x12 material with cutting accuracy to 1/32". This system can be optionally configured with additional material handling, installation and service agreement available from MiTek or other independent contractors. 120/240v, 30 amp single phase + 208/480v 25/15 amp 3ph power, 90 psi 16 cfm air required.
2006 MiTek RoofTracker System Price: $224,900 $149,900 :: FOB GA Condition: Good Description: 14' x 136' trackless side-eject gantry. Includes (17) 6'-10" x 14' slotted, 3/4" steel-top tables with ejectors.  Includes two (2) model 63750-501 RoofTracker gantry heads each with a 24" dia. X 14' roll w/joy-stick control, (1) model 68300 24" final roller. System includes all air-manifold, electrical bus bar system, jigging hardware, bridge-plates, etc.  480V, 3 ph power.
Virtek LPS-2DI Red Laser 1 Head System Price: $7,990 $6,799 :: FOB MI Condition: Good Description: Virtek Laser 1-Head Projection System - fixed head system allows for quick and accurate laser guided setups for wall panel or small roof truss parts (jacks, valleys, etc.) consists of one (1) red-laser heads for 14'x14' projection area (@ +16' ceiling ht.), includes system computer with environmental enclosure, system has had good maintenance including OEM system maintenance and reconditioning in Feb. '08. Virtek license agreement required, OEM continuing maintenance agreement and installation available.
2005 MiTek/PCS Twin-Axis Sheathing Saw Price: $37,000 :: FOB GA Condition: Good Description: PCS Twin-Axis Sheathing Saw - Optimizes sheathing material as it cuts x and Y axis simultaneously in one pass through the saw. Fully enclosed to reduce noise, dust, and improve operator safety; fully automated via downloaded sheathing cutting from wall design software. 480v, 3ph. ($72k new, lightly used for 1 year, in storage since '06 - Please open listing to view VIDEO)
2007 Klaisler Floor-Truss Agri-Stack AGS Price: $12,500 :: FOB SC  NEW ITEM! Condition: Good Description: Klaisler Agri-Stack AGS-02-0107, Heavy-duty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaft-mount gear-motors, stacks up to 40' floor trusses with a 30-40 second cycle time. Stacking operations controlled by reversing starter panel with indipendent motor overload protection control panel (push button controls included). Multi voltage 208/230/460v, 3ph.
2006 MiTek Roof Tracker Price: $316,000 $219,900 :: FOB TX  PENDING Condition: Good+ Description: Side eject system is 14 feet x 136 feet working length, [2] 24 inch diameter heads, trackless system with [17] 6’-6” x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] pucks per table. Both heads are ’06.  There is one ’06 MiTek 24 inch finish roller, [34] outfeed conveyor (15 pwr. / 19 idle), air-manifold, electrical bus bar system, jigging hardware, bridge-plates and ejector cover plates are included along with [20] exterior manual truss stacking racks. 460volt, 3phase.
2007 MiTek/PCS Wall Panel Line Price: $105,475 $85,475 :: FOB IN Condition: Good+ Description: MiTek/PCS Wall Panel Line - RH System includes 21' pre-stage conveyor to Power Framer nail-on-the-fly framing table builds 8' to 12' wall heights up to 24' in length, workers remain stationary as the wall continuously and automatically moves through 6 high-production nail guns. Framer transitions to 21' Blocking conveyor to Squaring Conveyor for finishing openings and subcomponents. System transitions to 20' stacking queue conveyor with Smart Crane which auto stacks up to 16' wall lengths according to pre-determined bundle layout on HD floor-mount rollers. 460v/60/3, 120v/60/1, air at 100 psi required, total system length 86'3". (System priced new at $234,000 - Seller will consider any reasonable offer)
1999 Timbermill 620PRO (TN) Price: $14,900 :: FOB TN  PENDING  NEW ITEM! Condition: Good Description: Mod.# MH6Pro-20, six blades cuts lumber from 2x4 through 2x12, 4x2 lengths from 12” to 20’ including four angle floor truss webs from 18", all powered movements,"Pro" model features faster angulation movements and faster carriage speeds with soft-start technology, 230/460V, includes chain-drag scrap conveyor with long incline, spare blades and many spare parts (motors).
Virtek LPS-2D Red Laser Heads (MN) Price: $34,794 :: FOB MN Condition: Good Description: Virtek Laser Projection Heads - QUANTITY six (6) red-laser heads, with enclosure (no PC), and cables for up to 84 ft. projection @ 16' ceiling ht.  Heads are model LPS2-D(I) that have been under OEM maintenance agreement since installation. Virtek license agreement required, ready for shipment to OEM for inspection to obtain continuing maintenance agreement and installation.
2001 Lacey-Harmer Lasalign Projectors Price: $3,195 :: FOB IA Condition: Good Description: Red laser projectors enables utilization of engineering files to generate full scale laser image of desired truss on table work surface for fast and accurate jigging. Seven (7) projectors priced each, 5mW class 3a laser diode, great for enhancing current system or as spare parts; no computer or software included.