Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2007 Triad Template Stair Router Price: $19,944 $13,900 :: FOB OH Condition: Good Description: (TSR) - Features twin heavy duty Porter Cable 3 1/4 HP, single phase routers to cut top or bottom stringer or both stringers simultaneously with the template guided stair profiles. Triad's TSR can accommodate standard profiles, no riser profiles and split stringer configurations. Mechanically aided material indexing, quick changing templates and composite followers with tread dimensions from 7" run X 5 1/2 rise to 12 1/2 run X 9" rise. Nose Extension: 0" or 1/2" to 2", Tread Thickness: 1" to 1 ¾, Stringer Material: 5/4" X 10., 5/4" X 12, 2X10 and 2X12, Air: 3 cfm @ 100psi, 120vac, 40 amp power required.
2006 MiTek Tracked Gantry Heads Price: $14,990 each :: FOB GA Condition: Good Description: Two 10 HP MiTek heads (only) are available at this location, each with operator platform, safety bars, button controls, 24 inch diameter roller, electric brake, variable speed control to 160 feet per minute and 80 RIV drive chains.  Designed to fit TeeLok center-to-center rail spacing of 15'-1".  460 volt, 3 phase electrical.
2007 Triad Open Stair Stringer Saw Price: $35,800 $25,900 :: FOB FL Condition: Good+ Description: Skirt board saw model OSS that cuts open stringers. Includes stringer hold downs, infeed and outfeed conveyors, auto-indexing feature, [2] 30 inch carbide tipped blades and waste conveyor. Cuts up to four 2x10, 2x12 stringers at once, includes infeed and outfeed conveyor.  Includes (1) set of spare blades, two blades per set.  208 volt, 3 phase electrical.
2005 MiTek RoofGlider Gantry (FL) Price: $61,900 :: FOB FL  NEW ITEM! Condition: Good Description: 102 foot working length, MiTek side-eject system featuring 14 feet working height, tracked system with (14) 6'4" x 14 foot, slotted 3/4" steel-top tables with ejectors and (6) slots per table. Includes (2) 14'x24" dia. gantry heads, (13) stand-alone receivers, air-manifold, gantry head electrical chord system, bridge-plates and jigging hardware.  460v, 3phase electrical.
2004 MiTek Tracked Gantry System (CO) Price: $69,555 $54,900 :: FOB CO Condition: Good Description: 110 foot MiTek Side-eject system featuring 14 feet working height, tracked system with [14] 6'4" x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] slots per table. System includes [2] 14'x24" dia. gantry heads, MiTek Final Roller, air-manifold, electrical bus bar system, jigging hardware, bridge-plates and ejector covers, 29 inside conveyors (14 pwr), 18 outside conveyor (8 pwr), 16 manual stacker arms. 460v, 3phase electrical.
2004 Koskovich Auto Omni Component Saw (CA) Price: $68,000 $56,990 :: FOB CA Condition: Good Description: Five-blade computerized saw that has been well maintained and is configured with [1] 30 inch blade, [3] 20 inch blades and [1] 12 inch blade. Also includes a computer monitor on the catcher side of the saw, waste incline and conveyor with shaker side pans, 4-head Matthews ink jet, set of spare blades and Omni spare parts.  This saw was taken out of operation in March of 2008 but still under power.  440 volt, 3 phase electrical service.  (infeed deck not included)
2004 MiTek Tracked Gantry (UT) Price: $142,000 $48,900 :: FOB UT Condition: Good Description: 14' X 156' side-eject gantry with floor mounted rail. Includes [20] 6 foot x 14 foot slotted, 3/4" steel-top tables with ejectors and [2] gantry heads each with a 24 inch diameter roll.  Gantry includes all air-manifold, bus bar electrical, jigging hardware, bridge-plates, etc. and is wired for 460 volt, 3 phase electrical service.  Taken out of service in May of 2008.  [Finish press and rollers shown in some pictures are not included.]
2004 MiTek Tracked Gantry (GA) Price: $154,000 $59,000 :: FOB GA  PENDING Condition: Good Description: 14' x 142' side-eject gantry with floor mounted rail. Includes (18) 6'-4" x 14' slotted, 3/4" steel-top tables with ejectors.  Includes two (2) model 68000 gantry heads each with a 24" dia. roll, and (1) model 68300 24" final roller, (15) powered interior rollers, (16) unpowered interior rollers, (13) powered exterior rollers, (22) unpowered exterior rollers,  (10) 4' horizontal unpowered rollers. System includes all air-manifold, electrical bus bar system, jigging hardware, bridge-plates, etc.  480V, 3 ph power.
1998 MiTek Tracked Gantry (TX) Price: $68,000 $53,900 :: FOB TX Condition: Good Description: 98 foot working length 'x 14' side-eject system includes [12] steel/wood tables with Uni-Strut, [30] idle conveyors and 24" dia. rollers in both the gantry and finish roller.  Includes all air-manifold, electrical, jigging hardware , 460v, 3ph power.
2000 Koskovich Auto Omni Component Saw (NC) Price: $61,000 $45,000 :: FOB NC Condition: Good Description: 5-blade s/n AO2K02xx, This saw is in current operation, well maintained and includes: remote monitor, shaker-pan waste conveyor, factory side pans, Exair cabinet coolers, factory console with PC, and all available spares.