Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

2000 Koskovich Auto Omni Component Saw (NC) Price: $61,000 $45,000 :: FOB NC Condition: Good Description: 5-blade s/n AO2K02xx, This saw is in current operation, well maintained and includes: remote monitor, shaker-pan waste conveyor, factory side pans, Exair cabinet coolers, factory console with PC, and all available spares.
2007 IBS Automated Wall Equipment Price: $44,000 $39,900 :: FOB FL Condition: Good+ Description: Includes IBS squaring-sheathing table with pneumatic skate-wheel lift-outs and STB single-tool stitching bridge with optional upgraded tools, bridge track, handle bar router. ½ ton panel lift with hoist and support frame.  Four (4) 24" x 10 ft long conveyor sections with legs are included.  Equipment in good+ working condition and available for immediate use.  No computers or monitors are include.  460 volt, 3 phase electrical, 90 psi air required.
2006 Hot Shot 44-66 Ft Stretch Trailer Price: $14,000 :: FOB ID Condition: Good Description: Stretch truss trailer from 44' to 66' lengths, with sliding tandem axles, fifth wheel connection, hydraulic lift, ABS brakes and locking rollers.  Passed DOT inspection in 2010.  Tire depth is 5/16" and the GVWR is 50,000 lbs.
2005 Robbins No-Rail Gantry System Price: $197,000 $135,000 :: FOB TX Condition: Good Description: 14'x180' trackless gantry with aisles.  Includes (2) gantry heads,  (26) plastic-top, steel tables with ejectors, full-length powered transfer roller, (21) powered and (9) idle conveyors, (1) 15'-6" Robbins finish roller. Each gantry head includes an AC invertor soft start control with 15 HP drive.  System includes all air-manifold, bus-bar electrical, jigging hardware and bridge-plates.  440v, 3phase.  Seller is willing to sub-divide this system.
2005 Robbins No-Rail Gantry Price: $135,000 $98,000 :: FOB TX Condition: Good Description: 14'x180' trackless gantry with aisles.  Includes (2) gantry heads,  (26) plastic-top, steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive.  System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates.  440v, 3phase.  Seller is willing to sub-divide this system.
1997 Koskovich Auto Omni Saw & '06 MII Infeed Deck Price: $47,300 :: FOB ID Condition: Good Description: 1997 Auto Omni five (5) blade component saw with digital read outs for length and angles and powered movements. Blade sizes are 12", 30" and three (3) 20".  Cuts lumber from 2 x 4 to 2 x 12 inch depths.  The saw has been well maintained and includes waste conveyor with shaker side pans, Matthews ink jet model DOD1104 and extra set of blades.    440 volt, 3 ph. / 120v 1 ph.  The 2006 MiTek infeed deck can be purchased separately for $5,000.  The infeed deck is already disassembled for shipping.
2001 Robbins No-Rail Gantry System Price: $133,887 :: FOB IN Condition: Good Description: 14'x186' trackless gantry with aisles. Includes (3) 14' x 24" gantry heads, (27) Slotted steel tables with ejectors and full-length powered transfer roller. Each gantry head includes an AC invertor soft start control with 15 HP drive, photo-eye with safety bar. Robbins Super-Torque 14'x24" final roller, 34 inside conveyor [17 pwr], 20 outside conveyor [7 pwr]System includes air-manifold, bus-bar electrical, jigging hardware and bridge-plates. 460v, 3phase. This system can be divided into custom length to meet buyer's specifications.
2007 Klaisler-Alpine Gantry System Price: $29,900 :: FOB SC  NEW ITEM! Condition: Good Description: 40'x 14' side-eject system complete, 36' buildable surface with 5 rebuilt Alpine tables with slotted-steel and NEW-Plastic top, 14'x72" tables, complete with inside pwr/idle conveyor, truss receivers, NEW Klaisler Gantry with riding platform, variable frequency drive and Sumitomo twin drives, includes all jigging hardware, WITH PE&E 14'x24" diameter final roller.  Very few hours since complete rebuild, 208/230/460v/60Hz/3ph power.
Ruvo 2200 Stair Saw Price: $26,667 :: FOB FL Condition: As New Description: Ruvo model 2200 machine capable of box stringers only and cuts two stringers at a time.  The saw comes with a year warranty; 90/08 remanufacture including new cylinders, valves, tubing, fittings and electrical.   Spindle motors are either new or rebuilt.  The machine has been recalibrated, all known problems fixed, motor bench tested, machine cycled and video of cutting stringer can be supplied.  Installation by the OEM is available at an additional charge.  Wired for 230 volt, 3 phase and 30 amp electrical service.
2006 Williams Pulverizer Price: $47,500 $12,000 :: FOB TN Condition: Good Description: Model “Hog C32” 100 HP, heavy-duty wood waste system includes crushing unit, waste blower, incline, hopper and discharge ductwork.  Generates 1 ½ tons of material per hour maximum capacity.  The drum is 24 inch diameter, uses hammers at 3200 RPM to pulverize wood scrap into saleable waste. 460v, 3Ph power.