Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Saws | Roof Truss | Floor Truss | Wall Panel | Material Handling | Trailers & Rolling Stock | Miscellaneous

1998 Tee Lok Rail Gantry Price: $25,300 :: FOB CA Condition: Good Description: 64 foot working length Tee Lok gantry with [9] tables, 6 ft x 14 ft each. Tee-Lok 14'x18" dia. roller gantry, 440v, 3 ph., 7.5 h.p. motor, steel slotted gantry tables with lift-out ejectors.  Includes [9] receivers, [6] powered conveyors and [19] unpowered conveyors, air manifold, jigging, aisle plates, ejector cover plates and electrical cables. Tee Lok finish press sold separately.  See separate ad listed on this website.
2005 MiTek Cyber A/T (UT) Price: $74,500 $69,000 :: FOB UT Condition: Good Description: Fully automated five-blade component saw with Dell pc upgrade.  Cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor w/remote PC [PC driven] in enclosure for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode) Belt scrap conveyor included with long incline (approx. 12') 230v, 3ph power required, spare set of blades included.
2006 CMF Roof Gantry Price: $46,000 :: FOB ID  NEW ITEM! Condition: Good Description: 100' working length x 14' side-eject system, refurbished by CMF in 2006.  Includes sixteen (16) 5'x14' steel bottom chord tables w/ejectors and composite building surface above the steel, one (1) 24" dia. CMF roller Gantry with a 10 HP drive, one (1) 24" dia. CMF final roller, twenty seven (27) receivers, nineteen (19) powered roller conveyors and thirteen (13) idler conveyors.  Also includes crane track, aisle slider pads, air-manifold, electrical and jigging hardware. 460v, 3ph power.
2004 MiTek Cyber A/T (PA) Price: $59,000 :: FOB PA Condition: Good Description: Fully automated five-blade component saw with Dell pc upgrade.  Cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Touch screen monitor w/remote PC [PC driven] in enclosure for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode) Belt scrap conveyor included.  No incline included.  230v, 3ph power required, spare set of sharpened blades included (dust hoods removed for cleaning).
2003 MiTek Cyber A/T (WI-OH) Price: $59,000 $47,900 :: FOB OH Condition: Good Description: Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Updated with Dell PC upgrade. Touch screen monitor in enclosure for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode) Belt scrap conveyor included with long incline (approx. 12') 230v, 3ph power required, Transformer to 230V and spare set of blades included.
2006 Lacey Harmer Sense-A-Plate Detector Price: $19,490 :: FOB MN Condition: Good+ Description: Truss plate detector includes variable roll height adjustment, two rows of detectors, control processor, missing plate alarm and middle support leg.  Approximate size is 2' x 17'-9" x 4'-3" high.  110 volt, 1 phase electrical.  PDF brochure available.
2003 MiTek Cyber A/T (CA) Price: $41,988 $28,900 :: FOB CA  PENDING Condition: Good Description: Fully automated five-blade component saw, cutting performed by 2-16" x 7 HP, 2-20" x 7 HP, 1-32" x 13 HP. Updated with Dell PC upgrade. Touch screen monitor for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 plus 4x2 lumber. Lengths cut from 14" (11" in manual mode) to 20 feet. Minimum 4-angle cut 22" (17" in manual mode) Belt scrap conveyor, catcher-side display,  220-240v/3ph/60 Hz/174 amp  power required.
Teelok / MiTek Jack Station Price: $18,000 $11,500 :: FOB GA Condition: Good Description: Jack station features TeeLok 14' single drive final roller press, (2) MiTek 6'4" steel-slotted tables, (3) 14' material conveyors, (4) truss racks for manual stacking, 480V 3ph.
1999 MiTek Cyber (NY) Price: $29,987 :: FOB NY Condition: Good Description: Frame #094, Fully automated five-blade component saw. Cutting performed by 2-16" X 6HP, 2-20" X 6HP, 1-32" X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor (no incline) 220V/60Hz/3ph, under power and available for inspection.
1998 MiTek Cyber (SC) Price: $29,900 :: FOB SC  NEW ITEM! Condition: Good Description: Frame #072, Fully automated five-blade component saw. Cutting performed by 2-16" X 6HP, 2-20" X 6HP, 1-32" X 12.5HP. WITH Dell PC upgrade featuring touch screen controls for fully automated or manual part input, all powered movements, cuts 2x4 thru 2x12 and 4x2. Lengths cut from 11 inches to 20 feet. Includes scrap conveyor with incline, out-feed skate-wheel conveyor, 6-flight Mitek live, in-feed deck, a complete, well maintained, OEM serviced automated saw.  220V/60Hz/3ph.