2008 Klaisler Rolsplicer (TN)

The BEST lumber splicer on the market splices 2x3, 2x4 and 2x6 lumber.  Includes two recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 10 foot infeed and 20 foot outfeed conveyors.  230v, 3 phase, 8.6 amp

2008 Klaisler Rolsplicer (SC)

The BEST lumber splicer on the market splices 2x3, 2x4 and 2x6 lumber. Virtually unused unit includes two recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 20 foot infeed and 20 foot outfeed conveyors ($14,000+ new).  208v, 3 phase, 8.6 amp

2007 Klaisler Floor-Truss Agri-Stack AGS

Klaisler Agri-Stack AGS-02-0107, Heavy-duty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaft-mount gear-motors, stacks up to 40' floor trusses with a 30-40 second cycle time. Stacking operations controlled by reversing starter panel with indipendent motor overload protection control panel (push button controls included). Multi voltage 208/230/460v, 3ph.

2008 Klaisler Raised-Rail End-Eject Floor Truss Gantry

Raised-Rail, End-Eject, Floor Truss Gantry Model RRG 3 AH 6.5 24 raised-rail (no track on floor) gantry with riding platform, 6.5' x24" dia. roller, builds trusses from 9" to 26" depth and up to 40' in length with Tru-Arc continuous camber, FLIP-JIG lifts and flips a-side truss to b-side for completion, H.D. under-table air clamping, pop-up rollers allow for easy ejection of completed truss, incline-rail park area allows for finished truss to end-eject without re-positioning the gantry. Twin 7.5 h.p. Sumitomo braking gear motors (15 h.p. total), 230/460v, 3 phase, with dual-safety bars. (last two PHOTOS are representative of the machine when new NOT the actual unit).

2007 Klaisler Raised-Rail End-Eject Floor Truss Gantry (NC)

Raised-Rail, End-Eject, Floor Truss Gantry Model RRG 3 AH 6.5 24 raised-rail (no track on floor) gantry with riding platform, 6.5' x24" dia. roller, builds trusses from 9" to 26" depth and up to 40' in length with Tru-Arc continuous camber, FLIP-JIG lifts and flips a-side truss to b-side for completion, H.D. under-table air clamping, pop-up rollers allow for easy ejection of completed truss, incline-rail park area allows for finished truss to end-eject without re-positioning the gantry. Twin 7.5 h.p. Sumitomo braking gear motors (15 h.p. total), 230/460v, 3 phase, with dual-safety bars.

2005 Robbins Fatman II Floor Machines

Floor truss system builds trusses up to 32' in length and up to 26" in depth.  Riding Gantry with 24" roll with 1" wall, 4" shaft, 15 h.p. inverter drive, under-table cylinders, valves and manifolds, pop-up ejection.   Includes plate storage along both table edges and bus bar electrical delivery system.  There are (2) two 32 foot, working length tables available at this price, each.  440 volt, 3 Ph electrical.

2001 Tee-Lok TeeFloor Roller Press

 Side-eject, trackless operation, with slotted top, builds floor trusses to 26” width (depth) up to 40’ in length (System 6'W x 45'L).  Gantry features a 24 inch diameter roll, end-stops, and “fire hose” style pneumatic clamping for smooth movement.  230/460V, 3 phase electrical service.

1987 Klaisler G2640 Floor Machine

40' Model G2640 gantry style with riding platform, 24" dia. roller, builds trusses from13" to 26" depth and up to 32' in length side-eject,  air cylinder clamping on top of table and no separate parking areas.  Twin 5 h.p. drive systems, 85lb.crane rail, 230v, 3 phase, with dual-safety bars.

1986 Gang Nail Floor Machine

Floor press includes gantry head with 20 inch diameter roll, steel table, kick legs, fire hose clamping with manual 4-way valve controls, operator platform and end stops. Builds from 9 1/4 to 30 inch deep trusses, up to 40 foot long. Gantry has push button forward button and dynamic brake reverse controls. Equipment is disassembled. Manual, jigging hardware and some spare parts are included. 230 volt, 3 phase electrical.

1997 Truswal Space Joist Assembler