Used Equipment: Roof Truss
Used Listings
2008 Klaisler with MiTek Planx AutomationPrice: $189,900 :: FOB SC NEW ITEM!Condition: Good+ Description: Klaisler with MiTek Planx Automation - Planx integrated 60' working length, table-guided (NO rail) side-eject gantry system with continuous slotted steel top, featuring (19) MiTek 10" Planx at 36" on-center spacing with one (1) work station (Maximum distance between pucks = 25"). Includes one Klaisler 24" diameter gantry head with raised operator platform, Side-ejects to 60' powered transfer roller leading to 65' (7) powered and (6) idle out-feed roller conveyors. Tables include (8) sloping, skate wheel ejectors, interim Weg-It manual pucks between Planx. System includes 72' Wampfler under-table electrical system, all air manifold, and Planx operating console with work station. 208/230/460 volt, 3 phase. (System has seen very limited use, priced new at over $257,000) |
 |
Design your own custom roof truss gantry!Price: $Custom Pricing :: FOB Coast to CoastCondition: Good to go! Description: Don't see the system that is just right for you? With many of the listings below we can split the system up to create the perfect fit for your space or budget limitations. Need a 46' RoofGlider, with 50' of conveyor, and no final roller. or an 80' Klaisler line with a final roller and a stacker; we can do that! Call or e-mail us with your specific request and put us to work building a custom solution at a budget price. |
 |
1999 Klaisler Gantry System (TN)Price: $22,900 :: FOB TN NEW ITEM!Condition: Good Description: 82' working length x 14' side-eject, recessed rail system complete with 11 slotted-top "Weg-It" steel tables, 14'x72" tables with ejectors RECONDITIONED in 2006. Includes Klaisler patented receivers, inside powered/idle conveyors, and outside unpowered conveyor sections. Also includes Klaisler 14' x 24" dia. gantry, and Klaisler TR214-24 Final-Roller. System includes all air-manifold, electrical, base-plate, 80 lb. rail, and substantial jigging hardware, 460v/230v, 3ph power. This modern system is in very good working condition. |
 |
2007 MiTek Roof TrackerPrice: $225,000 $187,500 :: FOB TXCondition: Good+ Description: Side eject is 14 feet x 166 feet working length, trackless system with [21] 6’-10” x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] slots per table. System includes [2] Roof Tracker gantry heads, each with a 24 inch diameter roll, [17] pwr conv. [21] idle conv. (190' total). Air-manifold, electrical bus bar system, jigging hardware, bridge-plates and ejector cover plates are included. Electrical service required is 460volt, 3phase. |
 |
2006 MiTek RoofTracker SystemPrice: $224,900 $149,900 :: FOB GACondition: Good Description: 14' x 136' trackless side-eject gantry. Includes (17) 6'-10" x 14' slotted, 3/4" steel-top tables with ejectors. Includes two (2) model 63750-501 RoofTracker gantry heads each with a 24" dia. X 14' roll w/joy-stick control, (1) model 68300 24" final roller. System includes all air-manifold, electrical bus bar system, jigging hardware, bridge-plates, etc. 480V, 3 ph power. |
 |
2006 MiTek Roof TrackerPrice: $316,000 $219,900 :: FOB TX PENDINGCondition: Good+ Description: Side eject system is 14 feet x 136 feet working length, [2] 24 inch diameter heads, trackless system with [17] 6’-6” x 14 foot, slotted 3/4" steel-top tables, with ejectors and [8] pucks per table. Both heads are ’06. There is one ’06 MiTek 24 inch finish roller, [34] outfeed conveyor (15 pwr. / 19 idle), air-manifold, electrical bus bar system, jigging hardware, bridge-plates and ejector cover plates are included along with [20] exterior manual truss stacking racks. 460volt, 3phase. |
 |
2005 MiTek RoofTracker System (OH)Price: $163,000 :: FOB OHCondition: Good Description: 14' x 160' trackless side-eject gantry. Includes (20) 6'-10" x 14' slotted, 3/4" steel-top tables with ejectors. Includes two (2) model 63826-501 RoofTracker gantry heads (one 2005 / one 2006) each with a 24" dia. X 14' roll w/joy-stick control and riding platforms. (1) model 68300 24" final roller, 320' conveyor (28) powered interior/exterior rollers, (36) idle interior/exterior rollers, System includes all air-manifold, overhead tracked electrical system, jigging hardware, bridge-plates, two complete park sections. 460V, 3 ph power. |
 |
2004 MiTek RoofGlider (PA)Price: $79,950 :: FOB PA SOLDCondition: Good Description: 14' x 150' trackless side-eject gantry. Includes (17) 6'-6" x 14' slotted, 3/4" steel-top tables with ejectors. Includes two (2) model 82700-501 RoofGlider gantry heads each with a 24" dia. X 14' roll w/joy-stick control, [7] manual stacker arms. System includes all air-manifold, electrical bus bar system, all available jigging hardware, bridge-plates, etc. 480V, 3 ph power. |
 |
2003 MiTek RoofGlider System (PA)Price: $98,750 :: FOB PA PENDINGCondition: Good Description: 14' x 140' trackless side-eject gantry. Includes (19) 6'-6" x 14' slotted, 3/4" steel-top tables with ejectors. Includes two (2) model 82700-501 RoofGlider gantry heads each with a 24" dia. X 14' roll w/joy-stick control, (1) model 68300, 24" final roller, (17) powered interior rollers, (16) unpowered interior rollers, (12) powered exterior rollers, (26) unpowered exterior rollers, and [15] manual stacker arms.. System includes all air-manifold, electrical bus bar system, all available jigging hardware, bridge-plates, etc. 480V, 3 ph power. |
 |
2002 MiTek RoofGliderPrice: $77,222 :: FOB CACondition: Good Description: Side eject system model 82700-501 is 14' wide x 104' in length, trackless with [13] 6'-6" x 14 foot, slotted 3/4" steel-top tables, with [13] pop-up side ejectors, [7] powered interior out-feed rollers, [5] idle interior out-feed rollers, and [10] idle exterior rollers. System includes [1] Roof Glider 14'x24" dia. gantry head and two 11' parking stations. Air actuated ejector and receivers includes air-manifold and multiple controls. Includes jigging hardware, pucks, bolts, nuts, bridge-plates and ejector cover plates. Wired for 480 volt, 3 phase electrical service with 100 ft. of overhead cable that supports Festooned power cable. |
 |