Used Equipment: Wall Panel

Used Listings

2006 Virtek Laser MC Price: $94,100 $59,900 :: FOB NJ Condition: Good+ Description: Automated plate cutting/laser burning layout system is complete with Virtek Laser MC Class IV laser w/computer workstation, Vista Angle Boss undertable cut-off saw and infeed table with lumber advance pusher bar cuts material from 2"-10" thick up to 16' in length. System precision cuts and laser marks wall panel parts with extreme accuracy, infeed speed of 30" per sec., optimizes lumber usage, minimizes scrap, improves quality and reduces labor. Includes 20" blade and power in-feed deck. Safety guard, pusher system and motor included, but just not shown in pictures. MS Windows 98 operating system provides easy user interface reduces operator error and speeds production. Has logged low operating time. Requires 480V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. (Please open listing to view VIDEO)

2006 Virtek Laser MC (PA) Price: $59,000 :: FOB PA Condition: Good Description: Automated plate cutting/laser burning layout system is complete with Virtek Laser MC Class IV laser w/computer workstation, Vista Angle Boss undertable cut-off saw and infeed table with lumber advance pusher bar cuts material from 2"-10" thick up to 16' in length. System precision cuts and laser marks wall panel parts with extreme accuracy, infeed speed of 30" per sec., optimizes lumber usage, minimizes scrap, improves quality and reduces labor, 20" blade, power in-feed deck, 480V, 3ph power. Safety guard, pusher system and motor included. MS Windows 95 operating system provides easy user interface, reduces operator error and speeds production. Requires 480V, 3ph power for saw, two 110 volt, single phase circuits required for the PC and the laser. 80 PSI air. (Please open listing to view VIDEO)

2002 Koskovich Omni Mini-Miser Price: $29,590 :: FOB IN Condition: Good to Fair Description: Automated cut-off and marking saw for wall frame processing, 90° (square) cuts only. Cuts and marks all wall frame parts up to 15,000 ln. ft. per 8 hour shift (feed rate to 50 ft per second.). Features on the fly D-Print option (two face + one edge Matthews Ink-Jet) printing layout and part I.D. from all major wall design software. Hand feed material from 6' to 16', 2x3 through 2x12 material with cutting accuracy to 1/32". This system can be optionally configured with additional material handling, installation and service agreement available from MiTek or other independent contractors. 120/240v, 30 amp single phase + 208/480v 25/15 amp 3ph power, 90 psi 16 cfm air required.

2005 MiTek/PCS Twin-Axis Sheathing Saw Price: $37,000 :: FOB GA Condition: Good Description: PCS Twin-Axis Sheathing Saw - Optimizes sheathing material as it cuts x and Y axis simultaneously in one pass through the saw. Fully enclosed to reduce noise, dust, and improve operator safety; fully automated via downloaded sheathing cutting from wall design software. 480v, 3ph. ($72k new, lightly used for 1 year, in storage since '06 - Please open listing to view VIDEO)

2007 MiTek/PCS Wall Panel Line Price: $105,475 $85,475 :: FOB IN Condition: Good+ Description: MiTek/PCS Wall Panel Line - RH System includes 21' pre-stage conveyor to Power Framer nail-on-the-fly framing table builds 8' to 12' wall heights up to 24' in length, workers remain stationary as the wall continuously and automatically moves through 6 high-production nail guns. Framer transitions to 21' Blocking conveyor to Squaring Conveyor for finishing openings and subcomponents. System transitions to 20' stacking queue conveyor with Smart Crane which auto stacks up to 16' wall lengths according to pre-determined bundle layout on HD floor-mount rollers. 460v/60/3, 120v/60/1, air at 100 psi required, total system length 86'3". (System priced new at $234,000 - Seller will consider any reasonable offer)

2006 Panels Plus Manual Framer Price: $17,900 :: FOB PA Condition: Good Description: Panels Plus Manual Framer - 16' x 12' manual framer with 2 three-gun tool dollies with push button controls, stud locaters at 16" & 24" o.c., pop-up skate-wheel transfer, motorized telescoping arms for wall height (120v, 1ph), builds walls 2x4 and 2x6 from 6'11" to 12'4". Table is a trackless design for easy install.

2007 IBS Automated Wall Equipment Price: $44,000 $39,900 :: FOB FL Condition: Good+ Description: Includes IBS squaring-sheathing table with pneumatic skate-wheel lift-outs and STB single-tool stitching bridge with optional upgraded tools, bridge track, handle bar router. ½ ton panel lift with hoist and support frame. Four (4) 24" x 10 ft long conveyor sections with legs are included. Equipment in good+ working condition and available for immediate use. No computers or monitors are include. 460 volt, 3 phase electrical, 90 psi air required.

Triad Wall Panel Line with Stapling Bridge (OH) Price: $23,990 :: FOB OH Condition: Good Description: Three (3) station line includes DQ framing table 10' x 16' long, Gen II squaring table 12' x 20' long, Gen II stapling bridge with laser pointer, stud stitchers, hard/soft toggle and tool shift over conveyors, (2) transition conveyors 3' wide x 16' long, handle bar router and one panel lift with hoist. Two other panel lifts at this location can be purchased separately. See listing also shown under "Used Wall Panel Equipment". No dollies included. 120 volt, 3 phase electrical, 100 PSI air.

Triad Gen II Multi-Tool Sheathing System Price: $26,657 :: FOB OH Condition: Good Description: Model PS SPL S - Complete 10'6" X 32' Sheathing includes: staple/nail bridge (no tools included) with auto return, router-ready fixture, DeWalt circular saw, laser sight & joystick control. Squaring table model G2-0 SH is also well maintained and in good working condition.

Triad Generation II Wall Panel Equipment Price: $11,900 :: FOB GA NEW ITEM! Condition: Good Description: Squaring table and router bridge with auto return, SH/SQ sheathing table, 20'W x 28' L overhead lift with 1/2 ton crane & panel lift and six (6) 12 inch x 10 foot long transition skatewheel conveyors. 120v, 100 psi air required. Framer and staple bridge shown in some pictures are not included. We have listings of alternate framing tables and a sheathing system that can be paired with this equipment to create a complete wall line. See the separate listings under "Used Wall Panel Equipment".

Next Page >>

12 3

Items 1-10 of 23