Used Equipment

WTS is pleased, as broker, to offer the following items of used equipment. Although we assume that the information provided to us is truthful and accurate, we need to nonetheless caution you that all statements, information, descriptions, pictures, etc., relating to these listings, are provided by the Sellers of the respective items, and we don't have the time or ability to independently verify all that stuff! So, that's why we always encourage prospective buyers to go and inspect the equipment before purchasing, and to talk directly to the Seller about any questions or concerns.

All used equipment is sold AS IS, WHERE IS, and WITH ALL FAULTS.

When you've decided to make a purchase, we do ask you to sign our Purchase Order Buyer Acknowledgement.

Floor Truss

2005 MiTek RailRider End-Eject Floor Machine (AZ-OH) Price: $49,000 :: FOB OH Condition: Good Description: End-eject system, 42 foot working length, 54 foot overall length, 24 inch diameter gantry head roll, depth truss capacity from 10 inches to 24 inches. Clamping fence actuated by air cylinders mounted under the table, pop-up end-eject ejector idler rolls, plate storage along table edge, end stop jigging, operator's riding platform and pendant controls. Includes overhead plate rack with end-stands, end eject parking ramp, nine (9) exterior, 4 foot wide, idler conveyors and four (4) floor stacking racks. Electrical s/o chord, masts and wire cable included. 460 volt, 3 phase electrical.

2007 Klaisler Floor-Truss Agri-Stack AGS Price: $12,500 :: FOB SC PENDING Condition: Good Description: Klaisler Agri-Stack AGS-02-0107, Heavy-duty, 2 Pedestal stacker system consisting of two 2"x3" steel lift-arms, 2 stationary pedestals spaced 15' apart (15' total area), 2 aluminum upright arms, Sumitomo braking gear motors, two 6'x20' powered, 6 roller sections with 2.25 H,P, Sumitomo shaft-mount gear-motors, stacks up to 40' floor trusses with a 30-40 second cycle time. Stacking operations controlled by reversing starter panel with independent motor overload protection control panel (push button controls included). Multi voltage 208/230/460v, 3ph.

Klaisler 6-40 Traveling Floor Machine (KY) Price: $6,900 :: FOB KY NEW ITEM! Condition: Good Description: Floor truss press includes gantry head with operator platform, all steel table, kick legs, air-cylinder clamping, and quick change 2-4-6-8” step-blocks, with end stops. Builds from 12" to 24" deep trusses, up to 40 foot long, with pre-set camber. Gantry has two-handed push-button forward / reverse & stop controls. Well maintained, currently in service, and under power, with twin-drive, 5-HP, riding on floor-mounted 85# crane rail, 220 volt, 3 phase electrical.

2000 Tee-Lok Kick Leg Floor Machine Price: $9,900 :: FOB OH Condition: Fair Description: Floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & panic-stop controls. 230 volt, 3 phase electrical.

1986 Gang Nail Floor Machine Price: $9,990 $9,000 :: FOB NJ Condition: Good Description: Floor press includes gantry head with 20 inch diameter roll, steel table, kick legs, fire hose clamping with manual 4-way valve controls, operator platform and end stops. Builds from 9 1/4 to 30 inch deep trusses, up to 40 foot long. Gantry has push button forward button and dynamic brake reverse controls. Equipment is disassembled. Manual, jigging hardware and some spare parts are included. 230 volt, 3 phase electrical.

Alpine Speed Roll Kick Leg Floor Machine (TX) Price: $9,900 $8,900 :: FOB TX Condition: Fair+ Description: Alpine Speed Roll, floor truss press includes gantry head with 20 inch diameter roll, steel table, kick legs, air-cylinder clamping, operator platform and end stops. Builds from 12" to 24" deep trusses, up to 40 foot long. Gantry has toggle forward / reverse & stop controls. Includes partial, overhead plate rack, (4) 78" wide idler conveyors & (4) 38" wide idler conveyors. 230 volt, 3 phase electrical.

1983 Truswal SpaceJoist Floor Assembler Price: $4,900 :: FOB TX Condition: Good Description: Truswal model #C5 SJA4T1H2E SpaceJoist machine, 45' overall length, single clamp head, builds from 9 1/4" to 15 3/4" depths up to 40' long. Can build with either P1 or P2 SpaceJoist webs. Includes Vickers hydraulic pump with reservoir, built in camber,10 HP motor, jigging, manual, parts list and spare parts. 220 volt, 3 phase.

Idler Conveyors - 4 Ft Wide Price: $1,600 :: FOB TN Condition: Good Description: Quantity of twenty (20) idler conveyors with stands, 24" height, 5" diameter. Four-foot-wide rollers, bearings with grease fittings, disassembled and ready to ship. Ideal for use with a floor machine.

2001 Klaisler Rolsplicer (PA-OH) Price: $4,430 $3,500 :: FOB OH PENDING Condition: Good Description: The industry's best floor truss chord splicer, splices both 2 X 4 and 2 X 6, splices in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices. Includes dual recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor, 10 foot infeed and 20 foot outfeed conveyors. 460v, 3 phase. (Please open listing to see attached video)

Truswal Roslplicer Price: $2,900 :: FOB OH Condition: Fair Description: Splices 2 X 4 in vertical orientation and forces lumber together (compression) prior to plate pressing, single operator easily trained to accomplish accurate, reliable splices. Includes dual recessed simultaneous activation buttons, guarded motors and sprockets, 3 HP motor. 460v, 3 phase.

Next Page >>

Items 1-10 of 15